REVIEW ARTICLE


Modeling of a Bio-Thermo-Electric Micro-Cooler



Aparna Prabhakar, Michael C. Murphy, Ram V. Devireddy*
Department of Mechanical Engineering, Louisiana State University, Baton Rouge, USA


Article Metrics

CrossRef Citations:
2
Total Statistics:

Full-Text HTML Views: 1556
Abstract HTML Views: 2015
PDF Downloads: 808
Total Views/Downloads: 4379
Unique Statistics:

Full-Text HTML Views: 799
Abstract HTML Views: 1165
PDF Downloads: 540
Total Views/Downloads: 2504



Creative Commons License
© 2007 Prabhakar et al.

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: (https://creativecommons.org/licenses/by/4.0/legalcode). This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at 2508 CEBA Bldg., Dept. of Mechanical Engineering, Louisiana State University, Baton Rouge, LA 70803, USA; Tel: 225 578 5891; Fax: 225 578 5924; E-mail: devireddy@me.lsu.edu


Abstract

This work is a part of an on-going research effort to fabricate a device consisting of an array of micro thermoelectric coolers (μTECs) for highly localized control of temperature in biological systems. A preliminary lumped 1-D parameter model was developed and numerical simulations were carried out to identify the critical and optimal design parameters for a μTEC operating under steady state conditions. The lumped parameter analysis revealed the presence of a new limitation on the maximum possible current through the system, which we denoted as the secondary breakdown current (as opposed to the primary breakdown current associated with Joules heating). To further understand the effect of contact resistances (thermal and electrical), radiative effects, and lateral effects (interactions between μTECs) in our device, we developed a 3-D finite element model (FEM) using ANSYS®. The FEM analysis identified the optimal distance between μTECs to generate discrete and distinct temperatures within the cells located in the extracellular matrix and thus, generating the optimal design specifications for our device.